| High–and low–cycle fatigue crack initiation using polycrystal plasticity A Manonukul, FPE Dunne Proceedings of the Royal Society of London. Series A: Mathematical, Physical …, 2004 | 303 | 2004 |
| Physically-based model for creep in nickel-base superalloy C263 both above and below the gamma solvus A Manonukul, FPE Dunne, D Knowles Acta Materialia 50 (11), 2917-2931, 2002 | 121 | 2002 |
| Effect of hot working on microstructure evolution of as-cast Nickel Aluminum Bronze alloy J Anantapong, V Uthaisangsuk, S Suranuntchai, A Manonukul Materials & Design 60, 233-243, 2014 | 97 | 2014 |
| A review on material extrusion additive manufacturing of metal and how it compares with metal injection moulding C Suwanpreecha, A Manonukul Metals 12 (3), 429, 2022 | 87 | 2022 |
| Initiation of dynamic recrystallization under inhomogeneous stress states in pure copper A Manonukul, FPE Dunne Acta materialia 47 (17), 4339-4354, 1999 | 86 | 1999 |
| Effects of replacing metal powder with powder space holder on metal foam produced by metal injection moulding A Manonukul, N Muenya, F Léaux, S Amaranan Journal of Materials Processing Technology 210 (3), 529-535, 2010 | 82 | 2010 |
| Multiaxial creep and cyclic plasticity in nickel-base superalloy C263 A Manonukul, FPE Dunne, D Knowles, S Williams International journal of plasticity 21 (1), 1-20, 2005 | 62 | 2005 |
| Influence of specimen layout on 17-4PH (AISI 630) alloys fabricated by low-cost additive manufacturing C Suwanpreecha, P Seensattayawong, V Vadhanakovint, A Manonukul Metallurgical and Materials Transactions A 52, 1999-2009, 2021 | 44 | 2021 |
| Rheological properties of commercially pure titanium slurry for metallic foam production using replica impregnation method A Manonukul, M Tange, P Srikudvien, N Denmud, P Wattanapornphan Powder technology 266, 129-134, 2014 | 41 | 2014 |
| A novel low-modulus titanium alloy for biomedical applications: A comparison between selective laser melting and metal injection moulding C Suwanpreecha, E Alabort, YT Tang, C Panwisawas, RC Reed, ... Materials Science and Engineering: A 812, 141081, 2021 | 36 | 2021 |
| Delamination wear of metal injection moulded 316L stainless steel C Kanchanomai, B Saengwichian, A Manonukul Wear 267 (9-10), 1665-1672, 2009 | 34 | 2009 |
| On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication C Suwanpreecha, A Manonukul Rapid Prototyping Journal 28 (6), 1076-1085, 2022 | 33 | 2022 |
| Effects of acrylic acid-grafted HDPE in HDPE-based binder on properties after injection and debinding in metal injection molding P Wongpanit, S Khanthsri, S Puengboonsri, A Manonukul Materials Chemistry and Physics 147 (1-2), 238-246, 2014 | 32 | 2014 |
| Fretting-contact-induced crack opening/closure behaviour in fretting fatigue N Noraphaiphipaksa, A Manonukul, C Kanchanomai, Y Mutoh International Journal of Fatigue 88, 185-196, 2016 | 27 | 2016 |
| Geometry anisotropy and mechanical property isotropy in titanium foam fabricated by replica impregnation method A Manonukul, P Srikudvien, M Tange, C Puncreobutr Materials Science and Engineering: A 655, 388-395, 2016 | 22 | 2016 |
| Microstructure and mechanical properties of commercially pure titanium foam with varied cell size fabricated by replica impregnation method A Manonukul, P Srikudvien, M Tange Materials Science and Engineering: A 650, 432-437, 2016 | 22 | 2016 |
| Fretting fatigue with cylindrical-on-flat contact: Crack nucleation, crack path and fatigue life N Noraphaiphipaksa, A Manonukul, C Kanchanomai Materials 10 (2), 155, 2017 | 21 | 2017 |
| Fretting fatigue life prediction of 316L stainless steel based on elastic–plastic fracture mechanics approach N Noraphaiphipaksa, A Manonukul, C Kanchanomai, Y Mutoh Tribology International 78, 84-93, 2014 | 21 | 2014 |
| Determination of in-plane elastic properties of rice husk composite P Jearanaisilawong, S Eahkanong, B Phungsara, A Manonukul Materials & Design 76, 55-63, 2015 | 19 | 2015 |
| Flow behaviour of Nickel Aluminium Bronze under hot deformation B Thossatheppitak, V Uthaisangsuk, P Mungsuntisuk, S Suranuntchai, ... Materials Science and Engineering: A 604, 183-190, 2014 | 19 | 2014 |
